UNITY AUDIO: B.A.B.E

B.A.B.E – 12 Inch Active Subwoofers | Unity Audio

$11,995.00

Description

BASS – HOW LOW CAN YOU GO ?
The B.A.B.E. transforms the existing 3-way Boulder into a true 4-way monitoring system. With flexible soffit mount or free-standing installation options, the system can be mounted horizontally or vertically. An optional free-standing plinth/spacer is also available.
The 4-way system extends SPL and frequency response.
The sealed cabinet is internally isolated to reduce vibration interference and uses a single 300mm driver with a 125mm voicecoil, designed exclusively to low frequency reproduction.

The System
The system comprises two bass extension cabinets with their own rack mountable 750 watt class D amplifiers and speaker-management. All housed in separate rack mountable units that control all the audio routing, gain, cross-over management, optional EQ and Limiting.

BB-DSP Processor
With 4 balanced analogue inputs and 8 outputs with full matrix mixing capabilities, the Unity Audio BB-DSP gives the flexibility you need to control 2x B.A.B.E cabinets and Boulders, or even 4x B.A.B.E’s and Boulders for larger systems, or a L,C,R B.A.B.E/ Boulder for surround configurations. Compressors are available on every input as well as a high pass filter, 6 bands of parametric EQ and up to 1.3 seconds of delay.
The BB-DSP comes with a factory configured preset with the correct 167Hz Linkwitz Riley 24 dB per octave crossover, ganged outputs 1 & 2 feed the B.A.B.E’s, with ganged outputs 3 & 4 feeding the Boulders. A second preset is also provided effectively acting as a B.A.B.E bypass if required to use the Boulders by themselves with their original full frequency response.
Every output channel has high and low pass filters, 8 bands of parametric EQ, up to 1.3 seconds of delay as well as a new limiter designed to offer the best driver protection with the lowest distortion.
The BB-DSP runs at 96kHz as standard but can be switched into 48kHz mode to take advantage of 48dB/oct output crossover filters and two bands of dynamic EQ on both input and output channels.
The ethernet based PC control software gives you the ability to not only control all the devices on a network but also to store preset memories and configure systems offline.

Drivers
The B.A.B.E. uses an innovative 300mm woofer designed exclusively for sub and low frequencies. The driver employs a huge 130mm Hexatech external voice coil wound with a hexagonal-shaped aluminum coil wire (2-3 times thicker than standard woofers) for accurate music reproduction, superior durability and power handling. This driver delivers an extraordinary combination of audiophile musicality and high power handling.

Sealed cabinet
The B.A.B.E. retains the same sealed cabinet approach used throughout the Unity Audio range. This design approach provides faster, tighter and more accurate linear bass reproduction and results in less phase rotation, reduced time domain ringing, lower group delay and a shallower roll-off slope than inferior ported designs. These characteristics make The B.A.B.E. a natural choice for all critical music applications.

Flexibility
The B.A.B.E. is suitable for all recording and mastering facilities and has been carefully designed to suit all environments and applications.
The system can be used free standing or soffit mounted in either horizontal or vertical configurations without compromising performance.

Brand

UNITY AUDIO

Unity Audio

Unity Audio has been at the leading edge of monitor design for many years. We pride ourselves in taking a fresh approach to designing and manufacturing products, using different materials in innovative ways. We source quality components from reputable companies, working with skilled craftsmen, incorporating new ideas on traditional designs, in order to fine tune our products. Every Unity Audio product has been designed, built and tested all in the UK.

Used by the world's best artists

Unity Audio active monitors are used by the world’s best audio engineers, producers, Grammy award-winning artists, film composers, broadcasters, universities, mastering engineers and home studios.

Specifications
1 x 300mm (12”) Morel Woofer
Sealed Baltic Birch 18mm (.75”) Plywood Cabinet
Corian 30mm (1.2”) Front Baffle Design
1x 750 watt Class D 19” 2u rack mount amplifiers
Balanced XLR Input
500mm D x 386mm W x 614mm H
20.5” D x 15.2” W x 24.2” H

ID48 Technical Specifications
Analogue Inputs – 4
Electronically balanced, pin 2 hot
CMRR : >60dB @ 1kHz
Maximum Level : >20dBu
Input Impedance : 10kO balanced
Analogue Outputs – 8
Electronically balanced, pin 2 hot
Maximum Level : >20dBu
Source Impedance : <60O
Performance

Frequency Response (20Hz to 20kHz) : +/-0.4dB
Dynamic Range : >110dB unweighted (in to out analogue)
THD + N (+10dB @ 1kHz) : 0.0007%
Latency : 1.074ms (in to out, analogue, 96kHz)

Input Processing Features
Soft Knee Compressor
6 Parametric EQs
24dB/Oct HPF
2 bands of Dynamic EQ (48kHz mode)
Gain, Polarity, Delay

Output Processing Features
6 Parametric EQs
Crossover Filters up to 24dB/Oct (96kHz mode) 48dB/Oct (48kHz mode)
2 bands of Dynamic EQ (48kHz mode)
Gain, Polarity, Delay, Limiter

Comms
Remote control via 100Mbps Ethernet, USB Type B
Up to 30 presets may be stored for offline recall
Power Requirements
3-pin IEC input, fused
240VAC, 50Hz < 40W

Dimensions
Height : 44mm (1.75inch) 1U
Depth : 213mm (8.4 inches)
Width : 482mm (19 inches)
Weight
Net : 2.8kg

BB-DSP DEQ page

Reviews

There are no reviews yet.

Be the first to review “B.A.B.E – 12 Inch Active Subwoofers | Unity Audio”

Your email address will not be published. Required fields are marked *

Reviews

Free Recycle
For Your Old

Reserve & Collect In Store

Free Delivery Australia Wide

In Home Installation & Consultaion

Instant Finance Now Available

Find a lower comparable price online? We’ll beat it!*